7mÊÓƵ

APPLICATIONS
CWC LowFriction® UL Type XHHW-2 conductors are primarily used in conduit and cable trays for services, feeders, and branch circuits in commercial or industrial applications in accordance with the NEC. The conductor is suitable for use in dry or wet locations at temperatures not to exceed 90°C. The conductor is rated 600 V / 1000 V. Although this product may be installed without the application of pulling lubricant, a good quality pulling lubricant is recommended.

CONSTRUCTION
Conductor:
Annealed compressed stranded copper.
Insulation:
Low coefficient of friction, abrasion, moisture, and heat resistant colored crosslinked polyethylene (XLPE).
Conductor Identification:
Colored XLPE
Voltage Rating:
600 V

RATINGS AND MARKINGS

• Sizes 6 7mÊÓƵ and larger marked FT2
• Sizes 6 7mÊÓƵ and larger in all colors sunlight resistant and marked
• Sizes 1/0 7mÊÓƵ and larger marked "FOR CT USE"
• RoHS Compliant

STANDARDS
These conductors are manufactured and tested to meet or exceed the following standards:

• ASTM B8 -- Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
• UL 44 -- Thermoset-Insulated Wires and Cables
• ICEA S-95-658 / NEMA WC70 -- Power Cables Rated 2000 Volts or Less for the Distribution of Electrical Energy
• Federal Specification AA-59544
• Federal specification JC-30B

PACKING

• 250 ft reel
• 500 ft reel
• 1000 ft reel
• Master reel
• Coil