-
Type W Magnet Crane Cable
type-w-magnet-crane-cable
-
Type W Single Conductor RHH/RHW 90掳C UL 600V/2kV
Applications
For use as portable power systems, entertainment industry activities such as theatre, television, nightclubs, motion pictures, mobile communication vans, spotlights and sound permanent or temporary power. Permanent wiring of 600 volt power supplies, hoists, cranes and other applications where flexible power leads must be installed in conduit or raceways.
Construction- Conductor is 8 - 500 MCM fully annealed stranded bare copper.
- Insulation is premium grade 90ºC EPDM.
- Jacket is black CPE.
- Jacket marking is TYPE W PORTABLE POWER CABLE (UL) DRY 90 ºC WET 75 ºC 2000V SUNLIGHT RESISTANT - P(#) MSHA-(SIZE)-TYPE RHH (UL) 600V.
- Temperature range of -40 ºC to +90 ºC .
- Voltage rating of 600 volt Type W.
- Water and sunlight resistant.
- Designed to withstand severe environmental conditions.
- Withstands exposure to oil, acids, alkalies, heat, flame, moisture and chemicals.
- Lengths cut to order.
- Meets or exceeds flame test requirements of MSHA, IEEE, ICEA, and UL.
- Conforms to ICEA S-68-516 (NEMA WC8).
- ICEA S-75-381 NEMA WC-58 UL TYPE W and RHH or RHW-2 MSHA approved.
-
Type W Magnet Crane Cable - Two Conductor 90掳C 600V/2kV
Applications
Magnet Crane Cable is a heavy-duty, portable cable that is designed especially to use on magnet cranes, and may be used on mobile mining equipment, lifting magnets, cutters, loaders, conveyers, drills or pumps where grounded circuits are not required, in portable power situations and as temporary power supply.
Construction- Conductors are flexible stranded, annealed copper.
- Insulation is Thermoset EPR.
- Cabled with fillers for roundness with an open reinforced over assembly for mechanical protection.
- Jacket is Thermoset CPE.
-
Type W Round Multi-Conductor 90掳C UL 600V/2kV
Applications
For use in heavy-duty services as power supply cable, AC systems (grounded and ungrounded), mobile and portable electrical equipment, motor and battery leads. For 2 conductor cables use on DC or AC single phase systems where no grounding is required, or on DC systems with one conductor for grounding. For 4 conductor cables, use on two or three phase AC systems with one conductor used for grounding. For 5 conductor cables, use in applications where separating the system neutral from the frame ground is required.
Construction- Conductor is 8 - 500 MCM fully annealed stranded bare copper.
- Insulation is premium grade color coded 90ºC EPDM.
- Jacket is 90 ºC Black CPE+ with temperature range of -40 ºC to +90 ºC .
- Jacket is Indent printed for easy identification (successive footage printing available).
- Jacket marking is TYPE W PORTABLE POWER CABLE 2000V 90ºC DRY 75 ºC WET SUN RES (UL) - PK(#) MSHA.
- Designed to withstand severe environmental conditions.
- Withstands exposure to oil, acids, alkalies, heat, flame, moisture and chemicals.
- Rope lay stranding for maximum flex life with excellent impact resistance and cable core bound for superior flexibillity and toughness.
- Suitable for continuous submersion in water.
- Lengths cut to order.
ICEA S-75-381 NEMA WC-58 UL TYPE W and MSHA approved.
Notes- These ampacities are based on a conductor temperature of 90ºC and an ambient air temperature of 40 ºC per ICEA PUB-S-75-381 NEMA WC0-8. For ampacities per National Electrical Code requirements, refer to the latest NEC edition.
- Shipping tolerance +/- 10%
- Heavy-duty neoprene jacket optional.
- Succesive footage printing available.
