Request Information
  • Control Cable UL Type TC or TC-ER

    18 7m视频 Control Cable FR-XLPE Insulated Conductors, Copper Tape Shield, PVC Jacket, 600V UL Type TC or TC-ER

    (12)

    Applications

    As flame-retardant multi-conductor control, signal or power cables rated 600V, 90掳C in wet or dry locations. Specifically approved for installation in cable trays per Article 336 of the NEC. Also approved for use in Class I remote-control and signaling circuits per Article 725 of the NEC. Type TC cable is suitable for use in Class I and II, Division 2 hazardous locations. Cables may be installed in air, in ducts or conduits, in tray or trough, and are suitable for direct burial.

    Construction

    Stranded uncoated copper conductors, 30 mils FR-XLPE flame-retardant cross-linked polyethylene insulation, color coded, conductors twisted with suitable fillers where necessary to make round, cable tape, helically applied copper tape shield, PVC jacket overall, surface printed.

    Specifications

    • Listed by UL as Type TC or TC-ER per Standard 1277 for Tray Cables.
    • Cables UL listed for Direct Burial.
    • Individual conductors pass UL VW-1 flame test.
    • Individual conductors UL listed as Type XHHW-2.
    • Overall jacket UL listed as Sunlight Resistant.
    • Cables with grounding conductor UL listed for Open Wiring.
    • Cables pass IEEE-383 ribbon burner flame test and ICEA 210,000 BTU/hr test.
    • Cables pass IEEE1202/CSA FT4 (70,000 BTU/hr) cable tray flame test.
    • Cables meet requirements of ICEA S-73-532, NEMA WC57 for Control Cables.

    Notes

    • Cables may be supplied with an insulated ground and marked 鈥淥pen Wiring.鈥
    • Standard color coding is Method 1 for NEC applications per Appendix E, Table E-2 of ICEA S-73- 532(TECH I006). This color coding method omits white and green from the color sequence. A white or green conductor can be supplied on request.

  • Control Cable UL Type TC or TC-ER

    16 7m视频 Control Cable FR-XLPE Insulated Conductors, Copper Tape Shield, PVC Jacket, 600V UL Type TC or TC-ER

    (12)

    Applications

    As flame-retardant multi-conductor control, signal or power cables rated 600V, 90掳C in wet or dry locations. Specifically approved for installation in cable trays per Article 336 of the NEC. Also approved for use in Class I remote-control and signaling circuits per Article 725 of the NEC. Type TC cable is suitable for use in Class I and II, Division 2 hazardous locations. Cables may be installed in air, in ducts or conduits, in tray or trough, and are suitable for direct burial.

    Construction

    Stranded uncoated copper conductors, 30 mils FR-XLPE flame-retardant cross-linked polyethylene insulation, color coded, conductors twisted with suitable fillers where necessary to make round, cable tape, helically applied copper tape shield, PVC jacket overall, surface printed.

    Specifications

    • Listed by UL as Type TC or TC-ER per Standard 1277 for Tray Cables.
    • Cables UL listed for Direct Burial.
    • Individual conductors pass UL VW-1 flame test.
    • Individual conductors UL listed as Type XHHW-2.
    • Overall jacket UL listed as Sunlight Resistant.
    • Cables with grounding conductor UL listed for Open Wiring.
    • Cables pass IEEE-383 ribbon burner flame test and ICEA 210,000 BTU/hr test.
    • Cables pass IEEE1202/CSA FT4 (70,000 BTU/hr) cable tray flame test.
    • Cables meet requirements of ICEA S-73-532, NEMA WC57 for Control Cables.

    Notes

    • Cables may be supplied with an insulated ground and marked 鈥淥pen Wiring.鈥
    • Standard color coding is Method 1 for NEC applications per Appendix E, Table E-2 of ICEA S-73- 532(TECH I006). This color coding method omits white and green from the color sequence. A white or green conductor can be supplied on request.

  • Control Cable UL Type TC or TC-ER

    14 7m视频 Control Cable FR-XLPE Insulated Conductors, Copper Tape Shield, PVC Jacket, 600V UL Type TC or TC-ER

    (12)

    Applications

    As flame-retardant multi-conductor control, signal or power cables rated 600V, 90掳C in wet or dry locations. Specifically approved for installation in cable trays per Article 336 of the NEC. Also approved for use in Class I remote-control and signaling circuits per Article 725 of the NEC. Type TC cable is suitable for use in Class I and II, Division 2 hazardous locations. Cables may be installed in air, in ducts or conduits, in tray or trough, and are suitable for direct burial.

    Construction

    Stranded uncoated copper conductors, 30 mils FR-XLPE flame-retardant cross-linked polyethylene insulation, color coded, conductors twisted with suitable fillers where necessary to make round, cable tape, helically applied copper tape shield, PVC jacket overall, surface printed.

    Specifications

    • Listed by UL as Type TC or TC-ER per Standard 1277 for Tray Cables.
    • Cables UL listed for Direct Burial.
    • Individual conductors pass UL VW-1 flame test.
    • Individual conductors UL listed as Type XHHW-2.
    • Overall jacket UL listed as Sunlight Resistant.
    • Cables with grounding conductor UL listed for Open Wiring.
    • Cables pass IEEE-383 ribbon burner flame test and ICEA 210,000 BTU/hr test.
    • Cables pass IEEE1202/CSA FT4 (70,000 BTU/hr) cable tray flame test.
    • Cables meet requirements of ICEA S-73-532, NEMA WC57 for Control Cables.

    Notes

    • Cables may be supplied with an insulated ground and marked 鈥淥pen Wiring.鈥
    • Standard color coding is Method 1 for NEC applications per Appendix E, Table E-2 of ICEA S-73- 532(TECH I006). This color coding method omits white and green from the color sequence. A white or green conductor can be supplied on request.

  • Control Cable UL Type TC or TC-ER

    12 7m视频 Control Cable FR-XLPE Insulated Conductors, Copper Tape Shield, PVC Jacket, 600V UL Type TC or TC-ER

    (12)

    Applications

    As flame-retardant multi-conductor control, signal or power cables rated 600V, 90掳C in wet or dry locations. Specifically approved for installation in cable trays per Article 336 of the NEC. Also approved for use in Class I remote-control and signaling circuits per Article 725 of the NEC. Type TC cable is suitable for use in Class I and II, Division 2 hazardous locations. Cables may be installed in air, in ducts or conduits, in tray or trough, and are suitable for direct burial.

    Construction

    Stranded uncoated copper conductors, 30 mils FR-XLPE flame-retardant cross-linked polyethylene insulation, color coded, conductors twisted with suitable fillers where necessary to make round, cable tape, helically applied copper tape shield, PVC jacket overall, surface printed.

    Specifications

    • Listed by UL as Type TC or TC-ER per Standard 1277 for Tray Cables.
    • Cables UL listed for Direct Burial.
    • Individual conductors pass UL VW-1 flame test.
    • Individual conductors UL listed as Type XHHW-2.
    • Overall jacket UL listed as Sunlight Resistant.
    • Cables with grounding conductor UL listed for Open Wiring.
    • Cables pass IEEE-383 ribbon burner flame test and ICEA 210,000 BTU/hr test.
    • Cables pass IEEE1202/CSA FT4 (70,000 BTU/hr) cable tray flame test.
    • Cables meet requirements of ICEA S-73-532, NEMA WC57 for Control Cables.

    Notes

    • Cables may be supplied with an insulated ground and marked 鈥淥pen Wiring.鈥
    • Standard color coding is Method 1 for NEC applications per Appendix E, Table E-2 of ICEA S-73- 532(TECH I006). This color coding method omits white and green from the color sequence. A white or green conductor can be supplied on request.

  • Control Cable UL Type TC or TC-ER

    10 7m视频 Control Cable FR-XLPE Insulated Conductors, Copper Tape Shield, PVC Jacket, 600V UL Type TC or TC-ER

    (12)

    Applications

    As flame-retardant multi-conductor control, signal or power cables rated 600V, 90掳C in wet or dry locations. Specifically approved for installation in cable trays per Article 336 of the NEC. Also approved for use in Class I remote-control and signaling circuits per Article 725 of the NEC. Type TC cable is suitable for use in Class I and II, Division 2 hazardous locations. Cables may be installed in air, in ducts or conduits, in tray or trough, and are suitable for direct burial.

    Construction

    Stranded uncoated copper conductors, 30 mils FR-XLPE flame-retardant cross-linked polyethylene insulation, color coded, conductors twisted with suitable fillers where necessary to make round, cable tape, helically applied copper tape shield, PVC jacket overall, surface printed.

    Specifications

    • Listed by UL as Type TC or TC-ER per Standard 1277 for Tray Cables.
    • Cables UL listed for Direct Burial.
    • Individual conductors pass UL VW-1 flame test.
    • Individual conductors UL listed as Type XHHW-2.
    • Overall jacket UL listed as Sunlight Resistant.
    • Cables with grounding conductor UL listed for Open Wiring.
    • Cables pass IEEE-383 ribbon burner flame test and ICEA 210,000 BTU/hr test.
    • Cables pass IEEE1202/CSA FT4 (70,000 BTU/hr) cable tray flame test.
    • Cables meet requirements of ICEA S-73-532, NEMA WC57 for Control Cables.

    Notes

    • Cables may be supplied with an insulated ground and marked 鈥淥pen Wiring.鈥
    • Standard color coding is Method 1 for NEC applications per Appendix E, Table E-2 of ICEA S-73- 532(TECH I006). This color coding method omits white and green from the color sequence. A white or green conductor can be supplied on request.