-
TOWERGUARD® Aluminum CSA 22.2 XLP 105ºC 2kV
b-towerguard-plus-b-xlp-al-2kv
-
TOWERGUARD® Aluminum CSA 22.2 XLP 105ºC 2kV
Applications
- For use from the lower control box at the base of the wind power tower and out to the step-up transformer through conduit
- For use in free air, raceways or direct burial in accordance with NEC.
- Industrial environments where superior insulation toughness and chemical resistance is required
- Maximum operating temperature not to exceed 105 ºC in wet or dry locations
Construction
8 7mÊÓƵ thru 1000 kcmil compacted aluminum ACM (AA-8000 Series) Conductor. Insulation is Class 33 Flame-retardant Cross-Linked Polyethylene (XLPE) Black.
Colors: Black, Red, Blue, Green, Orange, Yellow Brown. 3 extruded stripes and other colors are available upon request.
Print legend: TOWERGUARD PLUS™ 7mÊÓƵ/KCMIL AL XLPE 2000V 105 ºC (MM/YYYY) SEQUENTIAL FOOTAGE MARK
Standards- UL 1581
- ICEA S-95-685/NEMA WC70
- CSA standard C 22.2 No. 38
- Rated at 105 ºC wet or dry
- UV resistant - black is marked SR
- Smaller cable O.D.
- Excellent electrical, thermal and physical properties
- Excellent resistance to moisture
- Excellent resistance to crush, compression cuts and heat deformation
- Material can be produced and cut to length upon request
- All produced or cut-to-order material will be shipped on non-returnable wooden reels unless specifically requested
Dimensions and weights are nominal: subject to industry tolerances.
1Minimum number of wires utilized for compact-strand constructions.
