7m视频 CWC LowFriction® UL Type THHN / THWN-2, Aluminum Conductor, 90°C Dry or Wet, 75°C in Oil, Rated 600 V
APPLICATIONS
CWC LowFriction® UL Type THHN / THWN-2 conductors are primarily used in conduit and cable trays for services, feeders, and branch circuits in commercial or industrial applications in accordance with the NEC. When used as UL Type THHN, the conductor is suitable for use in dry locations at temperatures not to exceed 90°C. When used as UL Type THWN-2, the conductor is suitable for use in dry or wet locations at temperatures not to exceed 90°C or 75°C when exposed to oil or coolant. The conductor is rated 600 V. Although this product may be installed without the application of pulling lubricant, a good quality pulling lubricant is recommended.
CONSTRUCTION
Conductor:
Annealed compact stranded AA-8000 series Aluminum Conductor Material (ACM).
Insulation:
Low coefficient of friction, abrasion, moisture, and heat resistant colored polyvinyl chloride (PVC).
Covering:
Low coefficient of friction, abrasion, moisture, and heat resistant translucent Nylon polyamide.
CONDUCTOR IDENTIFICATION
Colored PVC
VOLTAGE RATING
600 V
TEMPERATURE RATINGS | |
Dry or Wet | 90°C |
Exposed to Oil | 75°C |
MINIMUM BENDING RADIUS | |
Overall Diameter Less than or Equal to 1.000 in | |
Not Under Tension | 4x outer diameter |
Under Tension (During Pull) | 6x outer diameter |
Overall Diameter Greater than 1.000 in | |
Not Under Tension | 5x outer diameter |
Under Tension (During Pull) | 7.5x out diameter |
RATINGS AND MARKINGS
STANDARDS
These conductors are manufactured and tested to meet or exceed the following standards:
PACKING
Notes: | |||||||
1. Dimensions and weights are subject to standard manufacturing tolerances and are subject to change without notice. |
UPDATED 27 FEB 2025